Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 305mm .......................................................K-3722T
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 305mm ....................................................K-3722T-C
Includes
French Curve Quiet-close Toilet Seat
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 305mm..................................................K-3722T-PG
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 305mm..................................................K-3722T-BG
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 400mm .......................................................K-4027T
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
TM
1-PC Toilet 400mm ....................................................K-4027T-C
Includes
French Curve Quiet-close Toilet Seat
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 160mm
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm/400mm roughing-in
dimension.
See Fig. #1
·
Closet flange must be 305mm/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #4
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008).
1128502-T01-E
please leave instructions for the
TM
........K-4713T
TM
TM
TM
........K-4713T
(5-1/2")
.
.
Fig. #1
SAN RAPHAEL CLASS FIVE
VITREOUS CHINA SKIRTED TRAPWAY ONE-PIECE TOILET
S-TRAP 305mm K-3722T/K-3722T-C/K-3722T-PG/K-3722T-BG
·
·
·
305mm......................................................K-3722T
305mm ..................................................K-3722T-C
305mm ...............................................K-3722T-PG
305mm ...............................................K-3722T-BG
400mm......................................................K-4027T
400mm ..................................................K-4027T-C
·
·
·
·
51mm
·
·
305mm/400mm(
·
·
·
·
2008.
-1-
TM
INSTALLATION INSTRUCTIONS
S-TRAP 400mm K-4027T/K-4027T-C
..................................K-4195T
.....................................K-4713T
..................................K-4195T
..................................K-4195T
..................................K-4195T
.....................................K-4713T
140mm
160mm
1)
305mm/400mm
1
4
ASME
Copyright Kohler China Ltd., 2012
-
A112.19.2-
, 2012
Advertisement
Related Manuals for Kohler SAN RAPHAEL K-3722T-C
Summary of Contents for Kohler SAN RAPHAEL K-3722T-C
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
WARNING: Risk of personal injury or product damage : Handle vitreous china products very carefully. Vitreous china can break and chip if you overtighten bolts and nuts. WARNING: Risk of external leakage . The fill valve nut has been factory-tightened to design specifications. If re-tightening is required, wrench tighten one turn past finger tight . -
Page 3: Installation
Finished Wall FRONT OF BOWL OF OUTLET Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION TO REMOVE EXISTING TOILET Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and bowl. - Page 4 TO INSTALL BOWL Drain Hole Position the template and align with drain hole. Mark down the position of foot and 5 holes. Fig.#4 Drive holes on ground with the driver 10mm of 10mm (3/8"), then insert anchor to holes. 10mm Fig.#5 Install brackets.
- Page 5 Carefully align and lower the bowl. Apply weight to the bowl rim to let the outlet insert into plastic trap. Outlet Plastic Trap Fig.#9 Carefully thread the screws into the brackets, until toilet is secure. Alternately tighten left and right sides to prevent pulling the toilet off center.
- Page 6 Install the tank lid and the seat. Use the supplied hardware pack for seat. Periodically check for leaks for several days following the installation. Fig.#13 FILL FLOAT WITH BALLAST Adjust the float by the cross-shaped thread and sliding it up or down on the float rod until the water level is at the marked water line.
- Page 7 1128502-T01-E...
-
Page 8: Consumer Responsibilities
CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.