Panasonic AK-HRP1005G Operating Instructions Manual page 112

Item
IRIS LEV MODE
M.PED CONT
LOCK SELECT
AUTO BUTTON
G/M PED VOL
FREE+LOCK
CAM SEL
DTL BUTTON
SKIN VOL
LCD BRIGHT
PANEL BRIGHT
B.GAMMA VOL
BUZZER
Setting value
ABS Selects between absolute values or relative values to be used for IRIS
RLTV
control operations.
ABS: Absolute value control.
RLTV: Relative value control.
IRIS Sets whether to enable master pedestal adjustment via the panel's mas-
DISP
ter pedestal dial.
LOCK Specifies the targets for which lock is applied when you press and hold the
FREE
[SEL] dial.
PUSH
M.PED
AWB Specifies the function that is executed when the [AUTO] button is
ABB
pressed.
AUTO SETUP
M.PED Specifies the target items for adjustment when adjusting the pedestal in
G.PED
the [PED], [FLARE], and [B.GAM] adjustment block.
"M.PED": Adjust the master pedestal.
"G.PED": Adjust the [PED R], [PED G], and [PED B].
SETUP Specifies the targets for which partial lock is applied when you press and
IRIS LV
hold the [PANEL LOCK] and [UP (FREE)] buttons at the same time.
PAINT
CAM1 to CAM99 Switches between connected cameras.
UHD Selects the target of detail control operations on the panel.
HD UHD: Control UHD detail.
SD HD: Control HD detail.
SD: Control SD detail.
UHD Selects the target of skin tone detail control operations on the panel.
HD UHD: Control UHD skin tone detail.
SD HD: Control HD skin tone detail.
S.CORR SD: Control SD skin tone detail. (Enabled when [CONNECT SETTING] is
set to "Serial(AK)" or "LAN(AK)".)
S.CORR: Control [HUE], [TONE], and [TABLE] for [SKIN CORRECTION].
1 to 20 Sets the brightness of the LCD panel.
1 to 5 Set the brightness of the panel buttons.
SDR Selects the target of black gamma control operations on the panel.
HDR SDR: Control the black gamma for the [BLACK GAMMA] menu.
HDR: Control the black gamma for the [HDR-PAINT] menu.
OFF Enable or disable the buzzer (beep/call tone).
ON
- 112 -
___ indicates factory default settings.
Setting details
ROP menu