Bissell OPTICLEAN 1989 Series User Manual page 9

Maintenance: Cleaning the Filters
WARNING
Do not operate vacuum with damp or wet fi lters, as well as without fi lters or the Dirt
Container in place. Allow components to dry before reassembling the Dirt Container.
1
With dirt tank removed, twist its top
counter-clockwise and pull up.
3
Filter can be rinsed to clean. Leave to
dry for 24 hours before reassembling.
5
Cyclone system then simply twists
apart into separate component pieces.
7
To access the post motor filter, press
the release button on the back of the
vacuum and pull the filter door away.
2
Grab the post-motor filter and turn it
clockwise, pulling up to remove.
4
6
Filter can be rinsed to clean. Leave to
dry for 24 hours before reassembling.
8
Cyclone system
can be easily
pulled out of the
dirt container.
The post motor
filter can be
removed from
filter door before
cleaning. Rinse
under tap to clean
and allow to dry
for 24 hours before
reassembling.
www.BISSELL.ca
9