Burner Specifications And Applications - Thermo Pride OC2-56 Installation And Operation Manual

All installations and services must be performed by qualified service personnel.
The OL33, 37 and 39 furnaces have an external wire harness that mounts in pre-punched holes in the side casings
(See Fig. 13).
A Horizontal furnace is shown below with external wire harness and fan speed terminal strip (blower access panel
removed). (See Fig. 14).
H. BURNER SPECIFICATIONS AND APPLICATIONS
FURNACE THERMO
MODEL PRIDE'S
BURNER
SPEC NO.
OC2-56 TP-1401
OC5-85 TP-101
OH2-56 TP-1401
OH3-72 TP-101
OH5-85 TP-101
OH11-105 TP-101
OH16-125 TP-102
OL2-56 TP-1401
OL5-85 TP-101
OL11-105 TP-101
OL16-125 TP-102
OL20-151 TP-1003
OL33-200 TP-104
OL37-250 TP-105
OL39-320 TP-106
OT5-85 TP-101
OT11-105 TP-101
OT16-125 TP-102
* INSULATOR S = SLEEVE OR N = NONE
** MAXIMUM NOZZLE SIZE FOR UL LISTING OF FURNACE. THE NOZZLE SIZE GIVES THE
NOMINAL FLOWRATE, IN GPH, FOLLOWED BY THE SPRAY ANGLE, IN DEGREE'S, AND THE
SPRAY PATTERN, EITHER "H" FOR HOLLOW CONE OR "S" FOR SOLID CONE. FOR EXAMPLE, A
NOZZLE RATED AT 0.65 GPH @ 100 PSIG THAT PROVIDES AN 80° SPRAY ANGLE AND A
HOLLOW SPRAY PATTERN WOULD BE ABBREVIATED IN THE TABLE AS "0.65 X 80H".
For more specific burner information, contact Thermo Products, LLC. P.O. Box 217, North Judson, IN 46366.
Phone 574-896-2133.
Fig. 14: The wiring system of a typical horizontal furnace
THERMO PRIDE BURNER APPLICATIONS
* BECKETT HEAD
INS BURNER
MODEL &
TUBE
LENGTH
N AFG-3-5/8
S AF 7-3/4
N AFG 3-5/8
S AF 7-3/4
S AF 7-3/4
S AF 7-3/4
S AF 7-3/4
N AFG 3-5/8
S AF 7-3/4
S AF 7-3/4
S AF 7-3/4
S AF 7-3/4
S AF 5-3/4
N AF 5-3/4
N AF 5-3/4
S AF 7-3/4
S AF 7-3/4
S AF 7-3/4
STATIC MAXIMUM
PLATE NOZZLE
SIZE**
FO 3-3/8 0.55X70H
F3 2-3/4 0.75X80H
F0 3-3/8 0.55X70H
F3 2-3/4 0.65X80H
F3 2-3/4 0.75X80H
F3 2-3/4 0.90X80H
F6 2-3/4 1.25X80H
F0 3-3/8 0.55X70H
F3 2-3/4 0.75X80H
F3 2-3/4 0.90X80H
F6 2-3/4 1.25X80H
F12 2-3/4 1.35X80S
F22 2-3/4 2.00X80S
F31 2-3/4 2.50X80S
F31 SPIDER 3.00X80S
F3 2-3/4 0.75X80H
F3 2-3/4 0.90X80H
F6 2-3/4 1.25X80H
9
STANDARD OIL
NOZZLE PUMP
SIZE PRESSURE
(PSIG)
0.50X70H 120
0.75X80H 100
0.50X70H 120
0.65X80H 100
0.75X80H 100
0.90X80H 100
1.10X80H 100
0.50X70H 120
0.75X80H 100
0.90X80H 100
1.10X80H 100
1.35X80S 100
1.75X80S 100
2.25X80S 100
2.75X80S 100
0.75X80H 100
0.90X80H 100
1.10X80H 100