Deactivating The Travel Lock; Replacing The Shaving Heads - Philips S7000 Series Manual

Deactivating the travel lock

Replacement

Replacing the shaving heads

If you try to switch on the shaver while the
travel lock is active, the travel lock symbol
flashes.
1 Press the on/off button for 3 seconds.
While you deactivate the travel lock, the travel lock
symbol lights up briefly. The shaver switches on
and is now ready for use again. Bluetooth is
automatically activated.
Note: The shaver unlocks automatically when it is
connected to the wall socket.
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
Replacement reminder
The notification symbol lights up when there is an
important message for you in the app. When it
lights up, simply open the app on your smartphone
and follow the easy tips that the app gives you.
When it is time, the app will indicate that the
shaving heads need to be replaced.
1 Switch off the shaver. Pull the click-on shaving
unit from the handle.
2 Discard the old click-on shaving unit and attach
the new click-on shaving unit to the handle.
('click').
23
English