Section Four: Using The Cooktop; Using The Cooktop; Control Knob - Thermador Pro-Harmony P36 Care And Use Manual

Thermador professional gas ranges use & care guide
Hide thumbs Also See for Pro-Harmony P36:
Table of Contents

Advertisement

Available languages

Available languages

SECTION FOUR: USING THE COOKTOP

SEALED BURNERS
Sealed Star
Brass Burner Base
The cooktop features four or six
gas surface burners; each rated
at 15,000 BTU/HR. The burners
are sealed to the stainless steel
top frame to prevent liquid spills
from accumulating below the top
surface, making it easier to clean.
On all models, the left front burner
has the exclusive ExtraLow
feature, the remaining burners are
standard. Each burner has its own

control knob.

Using the Cooktop

CONTROL KNOBS
The control knobs for two sealed
gas burners, one in front and one
in the rear, are located directly in
front of and below the pair of
burners on the control panel.
®
Knob
Standard Burner
The two words above each
control knob identifies the burner
position. For example, LEFT
FRONT, RIGHT FRONT, etc.
OPERATION OF THE
BURNERS
• Press in on the knob and turn it
counter-clockwise to the
setting.
• The igniter for the selected
sealed burner clicks and
sparks.
• After flame ignition, the igniter
stops clicking.
• Rotate the knob to any flame
setting between HI and SIM.
• The Blue Burner Signal Light,
between the burners, will light
when adjacent burners are lit.
They will remain on until the
burner is turned off.
Setting Indicator
Bezel
Control Knob
11
BTU Output for Standard Burners
• HI is equivalent to 15,000 BTU / HR.
• SIM is equivalent to 2,100 BTU /
HR.
BTU Output for ExtraLow
• HI is equivalent to 15,000 BTU /
HR.
• SIM is equivalent to 3,000 BTU /
HR.
• XLO is equivalent to 370 BTU /
HR.
ExtraLow
Burners
®
The control for the left front burner
has flame settings even lower than
the standard SIM settings.
Setting Indicator
ExtraLow
®
Range
ExtraLow
Burner
®
Control Knob
The drawing shows that the
control knob has an additional
range between the SIM and XLO
settings. When the knob is set
within this range, the flame cycles
off and on. By varying the length
of time the flame is off and on, the
heat is reduced even further to
cook delicate foods. For example,
these very low settings are
suitable for simmering and
poaching, melting chocolate and
butter, holding cooked foods at
temperatures without scorching or
burning, etc.
®
Burner

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents