Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK E549 Operating Manual

Removing and installing components during servicing

Attaching the cover

2 2
1
► Place the cover in the correct location (1).
► Tighten the screws (2).
The LIFEBOOK E549 has 2 screws, the LIFEBOOK E559 has 3 screws.
► Complete the installation, see "Finishing component removal", Page 73.

Finishing component removal

After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "Installing a battery", Page 42.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
Fujitsu 73