Recording; Record Function; Playback Function - The Singing Machine 7 Pad Electronic Drum Set SMI-1452 Instruction Manual

RECORDING

The Digital Drum's recording feature allows you to record and playback a song (approximately
1000 notes).
•
Data that can be recorded in the recording mode.
•
Drum pad and pedal data.
•
Song data (the number cannot be changed while in
the RECORD mode).
•
Track ON/OFF setting.
•
Tempo setting (The tempo cannot be changed while
in the RECORD mode).
•
Song Volume setting.
•
Reverb ON/OFF setting.
* MIDI data cannot be recorded to the memory.

Record Function

[1] Prepare to Record
Select the desired song, drum kit, tempo, track
on/off setting, and reverb settings.
[2] Start Recording
•
Press the [RECORD] button, the light starts
flashing.
•
Press the [START/STOP] button, the light stops
flashing and the recording process starts.
•
The recording process also starts once you strike a
drum pad.
Note:
•
When you begin recording, the vocal metronome
starts to count. But the sound of the vocal will not
be record. To stop the metronome, press the
[METRONOME] button.
[3] Stop Recording
•
To stop recording, press the [START/STOP] or
[RECORD] button. The record indicator will turn off.
•
When the memory becomes full, "FL" will appear on
the display and the recording process stops
automatically.

Playback Function

The recorded song can be played back by pressing
the [PLAY/STOP] button. To stop the playback,
press [PLAY/STOP] again.
Note:
When you record a new song, this song will replace
the previous recording.
The song recorded most recently will remain in
memory? If even you turn the power off.
E15
START/STOP
RECORD
PLAY/STOP