Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is dam- aged should be properly repaired or replaced by a qualified technician. SKU 94101 For technical questions, please call 1-800-444-3353. Page 2...
Place the rear of the die over the end of the pipe to be threaded. Verify that the inside diameter of the die matches the outside diameter of the pipe. Make sure that the pipe to be threaded is properly held in place. SKU 94101 For technical questions, please call 1-800-444-3353. Page 3...
Clean the Pipe Threading tool after each use. Clean dies after each use. Check for bro- ken teeth or pipe material between teeth. When not in use, store all parts in the case, and store the case in a dry location. SKU 94101 For technical questions, please call 1-800-444-3353. Page 4...
P005-4 DIE’S FRAME P005-5 WORK HANDLE PLASTIC HANDLE SCREW PAWL COVER PRESS SPRING DIES TIGHTENING RING DIES HEAD RETAINING RING SCREW SPRING BOLT PLASTIC RING KNOB RATCHET STEEL RETAINING RING SKU 94101 For technical questions, please call 1-800-444-3353. Page 5...