Magellan eXplorist 300 Reference Manual
  1. Manuals
  2. Brands
  3. Magellan Manuals
  4. Car Navigation system
  5. Magellan eXplorist 300
  6. Reference manual

Magellan eXplorist 300 Reference Manual

Thales navigationmagellan explorist reference manual 300
Hide thumbs Also See for eXplorist 300:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Magellan eXplorist 300
Reference
Manual
Topics:
• eXplorist 300 GPS Receiver
• Using the eXplorist 300
• Starting Up
• Navigation Screens
• Points of Interest
• Routes
• Track Logs
• Weather
• Electronic Compass
• Preferences
• Specifications
• Accessories
• Contacting Magellan Support

Advertisement

Table of Contents
loading

Related Manuals for Magellan eXplorist 300

Summary of Contents for Magellan eXplorist 300

  • Page 1 Magellan eXplorist 300 Reference Manual Topics: • eXplorist 300 GPS Receiver • Using the eXplorist 300 • Starting Up • Navigation Screens • Points of Interest • Routes • Track Logs • Weather • Electronic Compass • Preferences • Specifications •...
  • Page 2 LICENSE AGREEMENT Thales Navigation grants you, the purchaser, the right to use the software supplied in and with Thales Navigation GPS products (the “SOFTWARE”) in the normal operation of the equipment in accordance with the terms of the End User License Agreement that is included with the product.

  • Page 3: Table Of Contents

    Using the eXplorist 300 ........
  • Page 4 Table of Contents Points of Interest ........25 Marking Your Position .
  • Page 5 Table of Contents Track Logs ..........50 Track Logs .
  • Page 6 Table of Contents Clearing Memory ........76 Clearing All Track Logs.

  • Page 7: Explorist 300 Gps Receiver

    • Superior tracking with 14 parallel channels Antenna Display Backlight Button Arrow Joystick ZOOM IN MARK eXplorist 300 GPS Receiver (front) • 14 hour+ battery life on 2 AA batteries ™ • TrueFix GPS technology • 3 meter accuracy (WAAS/EGNOS) • Multiple track logs •...

  • Page 8: Button Descriptions

    300 GPS Receiver Button Descriptions: Power Turns the eXplorist on or off. Backlight Turns the display backlight on. Sequences from off to low to high intensity. ENTER Used to access highlighted menu items or accept highlighted buttons. ESCAPE Cancels data inputs.
  • Page 9 300 GPS Receiver Wrist Lanyard Strap Mounting Hole Battery Door eXplorist 300 GPS Receiver (back) Battery Door Fastener (Unscrew to open battery door to install batteries.)

  • Page 10: Installing The Batteries

    300 GPS Receiver Installing the Batteries The eXplorist 300 uses two AA batteries that are installed as shown in the accompanying diagram. Be sure to observe the proper polarity when installing the batteries. Under normal operating conditions you can expect to get more than 14 hours of battery life when using fresh batteries.

  • Page 11: Using The Explorist 300

    Using the eXplorist 300 The eXplorist 300 uses information from the GPS satellites orbiting the earth to provide you with detailed information about your exact location. This is the foundation that your eXplorist will use to provide you with the necessary information to arrive at your destination.

  • Page 12: Saving Your Position

    GOTO routes are the simplest and most commonly used feature of your eXplorist 300. With just the GOTO button the eXplorist will provide you with the tools needed to get to any point of interest stored in your database.

  • Page 13: Tracing Your Steps

    Using the eXplorist 300 A simpler example, and one you can do at just about any time, is finding your car in that ocean of other cars in the shopping mall parking lot. Just park your car, step outside and let your eXplorist compute your position.

  • Page 14: Additional Features

    Using the eXplorist 300 Additional Features Your Magellan eXplorist contains all of the features you would expect from a high-quality Magellan-brand handheld navigation device, as well as many more to make your outdoor experience more enjoyable. You have the ability to customize the navigation screens, enabling you to view the information that is important to you.

  • Page 15: Starting Up

    Starting Up Turning the eXplorist On To turn the eXplorist on, press the POWER button on the top right side. To prevent the eXplorist from being turned on accidentally, draining the batteries, you need to press ENTER when the Startup screen is displayed.

  • Page 16: Using The Explorist For The First Time

    Starting Up Using the eXplorist for the First Time Turn the eXplorist on. Press the Power button. When the Startup screen is displayed, press ENTER. Select Language. When you turn on the eXplorist for the first time, you are given the option of selecting one of the ten languages that will be used.
  • Page 17 Starting Up The Satellite Status screen will continuously update, and you will be able to graphically see how well your eXplorist is performing. When the eXplorist has enough information to compute a position fix, the Satellite Status screen is replaced with the Map screen. The arrow cursor in the center of the Map screen represents your position.
  • Page 18 Starting Up Enter Current Time. Use the Arrow joystick to enter the current time. Arrow Joystick Up: Increases the highlighted number Arrow Joystick Down: Decreases the highlighted number Arrow Joystick Right: Moves the highlight one character to the right Arrow Joystick Left: Moves the highlight one character to the left Toggle between AM and PM by moving the arrow joystick up or down when AM or PM is highlighted.

  • Page 19: Conclusion

    Conclusion This concludes the initial startup procedure for the Magellan eXplorist 300. Once the Map screen is displayed, you have successfully initialized the eXplorist and are ready to go. Now would be a good time to familiarize yourself with the different navigation screens (using the NAV button) and to set any preferences that may be different from the factory defaults.

  • Page 20: Navigation Screens

    Navigation Screens Accessing the Navigation Screens The eXplorist has three navigation screens, as well as a Satellite Status screen that can be accessed by pressing the NAV button. Each screen provides the same information in a different format, giving you the choice of choosing the screen that best suits your needs. Glendora vina 1.60mi...

  • Page 21: Map Screen Overview

    Navigation Screens Map Screen Overview Route Marker Track Indicator Map Scale Data Field 1 Changing Map Scale Press the Zoom In or the Zoom Out buttons to change how much of the map is displayed on the screen. The map scale indicator in the bottom left corner of the map indicates the relative distance between the two end-points of the scale.

  • Page 22: Showing Or Hiding Map Information

    Navigation Screens In the Cursor mode, you have a cursor icon displayed that you can use to pan around the map. The information displayed at the bottom of the screen provides you with the heading and distance of the cursor from your present position.

  • Page 23: Customizing The Map Information

    Navigation Screens Customizing the Map Information The information displayed at the bottom of the screen can be customized to change what is shown in the two map information fields. You can select from: • Bearing • Distance • Speed [default] •...

  • Page 24: Changing The Map Orientation

    Navigation Screens Changing the Map Orientation The default orientation for the Map screen is North Up. This means that the top of the display represents true north. This orientation can be changed so that the top of the display is more useful to you. You can choose from: •...

  • Page 25: Changing The Primary Usage

    Navigation Screens Changing the Primary Usage The Map screen can be changed to be primarily used on land (default) or marine. When in land usage, land areas are displayed as white areas on the display and water is displayed as dark gray. The opposite is true when the map is set for marine usage.

  • Page 26: Compass Screen

    Navigation Screens Compass Screen The Compass screen provides an easy-to-use graphical compass that should be familiar to most GPS users. Highlights of the Compass screen: • With an active route, the top of the Compass screen displays the name of the destination.

  • Page 27: Customizing The Information Fields

    Navigation Screens Customizing the Information Fields The information displayed at the top of the screen can be customized to information that is important to you. You can select from: • Bearing • Distance [default] • Speed [default] • Heading • ETA (Estimated Time of Arrival) •...

  • Page 28: Position Screen

    Navigation Screens Position Screen The Position screen provides detailed position information in a text format that is familiar to seasoned navigators. Highlights of the Position screen: • Position is displayed in textual format using the coordinate system selected. (See Setting Coordinate System for information on how to select the coordinate system.) •...

  • Page 29: Resetting The Trip Odometer

    Navigation Screens Resetting the Trip Odometer Whenever you begin a trip and you want to record how far you have travelled, you will want to reset the trip odometer to zero. To reset the trip odometer: While viewing the Position screen, press MENU. Use the Arrow joystick to highlight Reset Trip.

  • Page 30: Satellite Status Screen

    Navigation Screens Satellite Status Screen The Satellite Status screen is a handy way to visually see just how well the eXplorist is tracking and receiving satellite signals. Highlights of the Satellite Status screen: • Type of position fix and the number of satellites being tracked is displayed. [A 2D Position Fix requires three satellites;...

  • Page 31: Points Of Interest

    Waypoints and points of interest are identical.) There are two types of POIs in your eXplorist 300: POIs that you have marked (saved) and POIs that have been stored in your eXplorist as part of the built-in background map. These two classes of POIs are accessed from the same MENU option and can be used independently or combined to create routes.

  • Page 32: Marking Your Position (Personalized)

    Points of Interest Marking Your Position (Personalized) Normally, marking your position is simply a two-button process, MARK and ENTER. However, sometimes you will want to personalize the POI you are marking to make it easier to identify later. You are able to change the icon, change the name, and create a message.

  • Page 33: Making Pois For Locations Other Than Your Present Position

    Points of Interest Making POIs for Locations Other Than Your Present Position Sometimes, you may want to save a position that is not your present position. The eXplorist offers you two ways of doing that. You can modify the coordinates of your present position or you can use the Cursor mode of the Map screen to pan to the location you want to mark.

  • Page 34: Marking A Position Using The Map Cursor

    Points of Interest Marking a Position using the Map Cursor This gives you a way of marking a position, other than your present position, by moving the cursor around the map to a place where you want to create a POI. While viewing the Map screen, use the Arrow joystick to put the eXplorist into Cursor mode.

  • Page 35: The Poi Database

    Points of Interest The POI Database All of the POIs that you have saved and background map POIs that came with your eXplorist, can be accessed using the POI database. Once the database has been accessed and the POI selected, you can view or edit the POI. Highlights of the POI database are: •...

  • Page 36: Searching For A Preloaded Poi Using Nearest

    Points of Interest Searching for a Preloaded POI using Nearest Searching for a preloaded POI using the Nearest option is similar to searching for user- entered POIs with an additional step. Preloaded POIs have been categorized into five categories (Cities, Highways, Airports, Waterways and Parks) and you need to select the category that the POI will be found in.

  • Page 37: Searching For A Preloaded Poi Using Alphabetical

    Points of Interest Searching for a Preloaded POI using Alphabetical This is very similar to searching for a POI using nearest but due to the large numbers of POIs in the database, an additional step has been added to help you find the POI you are looking for quicker.

  • Page 38: Editing A User-Created Poi

    Points of Interest Editing a User-Created POI POIs that you have saved can be edited to change the icon, name, elevation and message. You can also change the location, but keep in mind that this effectively is creating a new POI in a new location.

  • Page 39: Deleting A User-Created Poi

    Points of Interest Deleting a User-Created POI POIs that you have saved can be deleted using this operation. If you have created a lot of POIs, you may wish to delete any unnecessary ones so that you may more easily search for a newly created POI.

  • Page 40: Viewing A User-Created Poi On The Map Screen

    Points of Interest Viewing a User-Created POI on the Map Screen POIs that you have saved can be viewed on the Map screen to assist you in locating the POI. Press MENU. Use the Arrow joystick to highlight Pts of Interest. Press ENTER.

  • Page 41: Copying A Preloaded Poi

    Points of Interest Copying a Preloaded POI POIs that have been preloaded as part of the background map can be saved as user-entered POIs. This does not delete preloaded POIs (preloaded POIs cannot be deleted) it just copies it to the My Points of Interest portion of the database. Press MENU.

  • Page 42: Viewing A Preloaded Poi On The Map Screen

    Points of Interest Viewing a Preloaded POI on the Map Screen POIs that have been preloaded as part of the background map can be viewed on the Map screen to assist you in locating the POIs. Press MENU. Use the Arrow joystick to highlight Pts of Interest. Press ENTER.

  • Page 43: Routes

    Routes Routes are the least understood and one of the most important functions of a GPS receiver. The better you understand routes and how to use them, the more enjoyment you will receive from using your eXplorist. The easiest and most common form of a route is a GOTO route.

  • Page 44: Creating A Goto Route

    Routes Creating a GOTO Route The instructions here describe the most common and easiest way to create a GOTO route. Press GOTO. Use the POI database to select the POI to be the destination. Note: Detailed instructions for searching the POI database can be found in the Points of Interest section of this manual.

  • Page 45: Creating A Goto Route From The Map Cursor

    Routes Creating a GOTO Route from the Map Cursor This will create a GOTO route to a point on the map that you have indicated by moving the crosshair cursor on the Map screen. While viewing the Map screen, use the Arrow joystick, causing the eXplorist to go into Cursor mode.

  • Page 46: Creating A Goto Route To A Map Object

    Routes Creating a GOTO Route to a Map Object This will create a GOTO route to a map object (city, highway, user POI, etc.) that you have indicated by moving the crosshair cursor on the Map screen over the map object. While viewing the Map screen, use the Arrow joystick, causing the eXplorist to go into Cursor mode.

  • Page 47: Multi-Leg Routes

    Routes Multi-Leg Routes Multi-leg routes can be used to navigate to a final destination using multiple legs. An example would be leaving the dock, motoring over to buoy 1, then the bait boat and finally to a fishing hot spot. This route would go from Dock to Buoy 1, Buoy 1 to Bait, Bait to Fish. Features of a multi-leg route: •...

  • Page 48: Creating A Multi-Leg Route

    Routes Creating a Multi-leg Route The eXplorist will provide you with an empty list for your route, and you can use the POIs saved in the POI database to create the route. All the tools you’d need to create the route will be described here.

  • Page 49: Activating/Deactivating A Route

    Routes Activating/Deactivating a Route An active route is the route you are presently navigating on. Anytime you activate a route, it will remain the active route until you either turn it off (deactivate) or activate a new route. GOTOs are automatically activated when they are created, while multi-leg routes need to be activated manually.

  • Page 50: Changing The Destination Leg Of An Active Route

    Routes Changing the Destination Leg of an Active Route When a route is created it can have many different legs to it, each leg with its own destination. If during your travels you want to skip some of the legs, you can select the leg that you want to proceed to next.

  • Page 51: Editing A Saved Route

    Routes Editing a Saved Route Saved routes can be edited to add a new leg at the end of the route (<Add POI>) remove a leg (Delete POI), insert a new leg (Insert POI) or change the destination from one POI to another (Replace POI).

  • Page 52: Reversing A Route

    Routes Reversing a Route Reversing a route takes a saved route and recreates it in reverse order. The sample route that was discussed earlier, Camp > Bridge > Marker > Ranger > Swim, would now be Swim > Ranger > Marker > Bridge > Camp. Press MENU.

  • Page 53: Deleting A Route

    Routes Deleting a Route The eXplorist can hold up to 20 different routes. When you have 20 routes saved, you will need to delete one before you can create a new one. Press MENU. Use the Arrow joystick to highlight Routes. Press ENTER.

  • Page 54: Copying A Route

    Routes Copying a Route Copying a route makes an exact duplicate of a route that can then be edited, saving you time in creating a new route that is similar to an existing route. Another use would be to copy a route and reverse it.

  • Page 55: Viewing A Route On The Map

    Routes Viewing a Route on the Map Viewing the route on the map gives you a way of graphically seeing the legs of the route as they appear on the map. Press MENU. Use the Arrow joystick to highlight Routes. Press ENTER.

  • Page 56: Track Logs

    Track Logs As you are moving, the eXplorist continuously records your track. Much like leaving breadcrumbs on the trail that you can use later to find your way back, the eXplorist leaves “electronic breadcrumbs” on the map. The advantage here is that you don’t have to worry about animals coming along and eating your return route markers.

  • Page 57: Stopping And Resuming Active Track Logging

    Track Logs Stopping and Resuming Active Track Logging This provides the ability to turn off the recording of the active track and then to start it up again. Press MENU. Use the Arrow joystick to highlight Track Log. Press ENTER. With Active Track highlighted, press MENU.

  • Page 58: Starting A New Active Track Log

    Track Logs Starting a New Active Track Log Before you can start a new active track log, you need to stop the one that is presently recording. Press MENU. Use the Arrow joystick to highlight Track Log. Press ENTER. Use the Arrow joystick to highlight Active Track. Press MENU.

  • Page 59: Saving An Active Track Log

    Track Logs Saving an Active Track Log This will save your active track log with a name you enter that you can use at some time in the future. This does not erase your presently active route; only saves the current active track and adds it to the list of available track logs.

  • Page 60: Creating A Backtrack Route

    Track Logs Creating a BackTrack Route BackTrack routes use your active track to create a route back to where you started, turning around and following the electronic breadcrumb trail that the eXplorist dropped. Press MENU. Use the Arrow joystick to highlight Track Log. Press ENTER.

  • Page 61: Clearing The Active Track

    Track Logs Clearing the Active Track The active track can get to be very large, especially if you haven’t cleared it in a while. It is recommended that if you plan to use BackTrack or to save the upcoming track log you should clear the active track before beginning your journey.

  • Page 62: Converting The Track Log To A Route

    Track Logs Converting the Track Log to a Route This function takes the track log and turns it into a multi-leg route that is saved in your route list. From here, the route can be edited if necessary. Note: Convert to Route is available for both active track logs and track logs you have saved. Press MENU.

  • Page 63: Viewing The Track Log On The Map

    Track Logs Viewing the Track Log on the Map Selecting View on Map displays the track log chosen and plots it on the Map screen. This gives you the opportunity to graphically view the track log. Note: View on Map is available for both active track logs and track logs you have saved. Press MENU.

  • Page 64: Working With Saved Track Logs

    Track Logs Working with Saved Track Logs It has been mentioned before that you can convert saved track logs to a route and view saved track logs on the map. There are three functions unique to saved track logs that you can perform: following, reversing and deleting the track.

  • Page 65: Deleting A Saved Track Log

    Track Logs Deleting a Saved Track Log Use this function to remove track logs that have been previously saved and are no longer needed. Press MENU. Use the Arrow joystick to highlight Track Log. Press ENTER. Use the Arrow joystick to highlight any track log you have previously saved. Press MENU.

  • Page 66: Weather

    Weather The eXplorist 300 has a weather function that provides temperature, barometric information a pressure altimeter reading. • Temperature. Temperature is displayed graphically as well as textually. Temperature measurements can be affected by the internal temperature of the eXplorist. If you leave your eXplorist in the sun, it will build up internal heat causing the temperature readings to be higher than the ambient temperature is.

  • Page 67: Calibrating The Pressure Altimeter

    Weather Calibrating the Pressure Altimeter To maintain the accuracy of the pressure altimeter you should calibrate it every 2 -3 hours using known elevation markers. Press MENU. Use the Arrow joystick to highlight Weather. Press ENTER. Press MENU. Use the Arrow joystick to highlight Set Altimeter. Press ENTER.

  • Page 68: Electronic Compass

    Electronic Compass The eXplorist 300 has a built-in electronic compass that provides you with heading information even when standing still. Heading information that is computed solely by GPS signals requires that you be moving before it can be computed. Notes about the electronic compass that you should be aware of: •...

  • Page 69: Calibrating The Compass

    Failure to calibrate the compass could result in errors of 20° or more to the displayed head-ing. Calibration is very simple and won’t take more than a few minutes. It is very important that there are no metallic objects near the eXplorist 300 during this calibration.

  • Page 70: Turning The Compass Off/On

    Electronic Compass Turning the Compass Off/On The electronic compass does cause a minor drain on the batteries and you have to option of turning it off to conserve battery life. This battery drain is very minor so it is unlikely that you will need to shut the compass off for this.

  • Page 71: Preferences

    Preferences The Preferences portion of the eXplorist provides the tools to personalize the eXplorist to your usage and needs. There are tools that are designed to give you full flexibility over its use, as well as to perform maintanence on the internal memory should the need arise.

  • Page 72: Restarting The Gps

    Preferences Restarting the GPS Restarting the GPS provides a means of giving the eXplorist information about its approximate position. Longtime GPS receiver users will know this option as initializing. To understand when you would use this option, a brief explanation of how the eXplorist works will be helpful.
  • Page 73 Preferences Region. Use the Arrow joystick to highlight the region of the world for your present location. You can also enter the coordinates for your present position, if you know them, by highlighting Enter Coord. This is rarely used and is not described in this manual. Press ENTER.

  • Page 74: Setting The Map Units

    Preferences Setting the Map Units In the Map Units option of Preferences you can select which units of measure for navigation data, the north reference, the coordinate system and the map datum that will be used by the eXplorist. Selecting Navigational Units of Measure The eXplorist can be set to display navigation data in Miles/Yd/MPH, Miles/Ft/MPH, NM/Ft/Knots, NM/M/Knots or KM/KPH.

  • Page 75: Selecting The North Reference

    Preferences Selecting the North Reference You can set the north reference used by the eXplorist to be either magnetic north or True North. Press MENU. Use the Arrow joystick to highlight Preferences. Press ENTER. Use the Arrow joystick to highlight Map Units. Press ENTER.

  • Page 76: Selecting The Coordinate System

    Preferences Selecting the Coordinate System Position data will be displayed in the coordinate system chosen in Map Units. The default system is latitude/longitude (Lat/Lon) and should be fine for most users. Experienced navigators will want to select a coordinate system that matches the maps or charts they are using.

  • Page 77: Selecting The Map Datum

    Preferences Selecting the Map Datum When using the eXplorist in conjunction with a map or chart, you should make sure that the map datum in the eXplorist matches the map datum that the map or chart uses. This can usually be found in the legend block on the map or chart. The default map datum for the eXplorist is WGS84 and should be used when in doubt.

  • Page 78: Using The Power Management Tool

    Preferences Using the Power-Management Tool When you are out in the field or on the water, extending the life of the batteries in your eXplorist should be something that you are mindful of. Three areas that you can control to extend the battery life are: (1) turning the eXplorist off when not in use, (2) setting how long the display backlight will be on and (3) turning the electronic compass off.

  • Page 79: Setting The Light Timer

    Preferences Setting the Light Timer As has been mentioned before, the display backlight makes the display easier to read in low- light situations but it also is the largest drain on the batteries. The Light Timer function provides you with the selection of how long you want the backlight to remain on while no buttons have been pressed.

  • Page 80: Personalizing The Explorist

    Preferences Personalizing the eXplorist This function provides a way to input information about yourself that could be used to return your eXplorist should you happen to lose it. The name you enter in the Name field will be displayed on the About screen. Steps to Personalize your eXplorist Press MENU.

  • Page 81: Selecting Languages

    Preferences Selecting Languages The eXplorist can be set to display information from any one of ten different languages. You can select from English, Français (French), Deutsch (German), Nederlands (Dutch), Suomi (Finnish), Español (Spanish), Italiano (Italian), Português (Portuguese), Svenska (Swedish) and Norsk (Norwegian). Selecting the Language for Your eXplorist Press MENU.

  • Page 82: Clearing Memory

    Preferences Clearing Memory The Clear Memory function of Preferences gives you a tool that you can use to globally clear: • all track logs [All Track Log], • all user-entered POI’s and routes [POIs/Routes], • all multi-leg routes [Routes], or •...

  • Page 83: Clearing All User-Entered Pois And Routes

    Preferences Clearing All User-Entered POIs and Routes Press MENU. Use the Arrow joystick to highlight Preferences. Press ENTER. Use the Arrow joystick to highlight Clear Memory. Press ENTER. Use the Arrow joystick to highlight POIs/Routes. Confirm. Use the Arrow joystick to highlight Yes to confirm or No to cancel. Press ENTER.

  • Page 84: Reseting The Explorist To Factory Defaults

    Preferences Reseting the eXplorist to Factory Defaults Press MENU. Use the Arrow joystick to highlight Preferences. Press ENTER. Use the Arrow joystick to highlight Reset Default. Press ENTER. Use the Arrow joystick to highlight All. Confirm. Use the Arrow joystick to highlight Yes to confirm or No to cancel. Press ENTER.

  • Page 85: Specifications

    Specifications Performance Receiver 14 parallel-channel technology, tracks up to 14 satellites to compute and update information. Antenna Patch Acquisition Times (optimal conditions) Warm Cold Update Rate Accuracy Position Velocity Limits Speed Altitude Physical Size 4.6” x 2.1” x 1.3” [h] x [w] x [d] 11.7 cm x 5.3 cm x 3.3 cm Weight 4 ounces (110 grams) with 2 AA batteries installed...
  • Page 86 Specifications Coordinate Systems Available 11 plus 1 user grid. Lat/Lon, UTM, OSGB, Irish, Swiss, Swedish, Finnish, German, French, USNG and MGRS Routes Total Up to 20 saved routes GOTO route BackTrack route Name Length 10 characters (including spaces) Track Logs Total Up to 5 saved track logs plus active track log Name Length...

  • Page 87: Accessories

    Accessories Expand the use of your Magellan eXplorist with accessories from the Magellan Online Store for all of your adventures. Carrying Case Specially designed for your Magellan eXplorist, this rugged black canvas carrying case attaches conveniently to your belt or pack strap. It features handy pockets for carrying extra batteries.

  • Page 88: Contacting Magellan Support

    The following information is provided so that if you need support for your Magellan eXplorist in North America, you can direct your questions/comments to the proper person at Thales Navigation. Customers in North America, Central America, South America, Asia, and South Technical Support If you need technical assistance, "how-to"...
  • Page 89 Contacting Magellan Support Customers in Europe, Middle East, or Africa regions Contacting Magellan in Europe Technical support and warranty service For Magellan product support and warranty service information in English, French, German, Spanish, Portuguese, Dutch, Norwegian, Finnish and Danish please dial FREE PHONE: 00800MAGELLAN* ( 00800 62435526) from 9 AM to 6 PM GMT &...

Table of Contents