System Access Warnings; Rack Mount Warnings - Nvidia RTX BLADE SERVER Installation Manual

‣
The power cord must have safety ground pin or contact that is suitable for the
electrical outlet.
‣
The power supply cord(s) is/are the main disconnect device to AC power.
‣
The socket outlet(s) must be near the equipment and readily accessible for
disconnection.
‣
The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided
with a suitable earth ground.
4.6. System Access Warnings
Caution: To avoid personal injury or property damage, the following safety instructions
apply whenever accessing the inside of the product:
‣
Turn off all peripheral devices connected to this product.
‣
Turn off the system by pressing the power button to off.
‣
Disconnect the AC power by unplugging all AC power cords from the system or
wall outlet.
‣
Disconnect all cables and telecommunication lines that are connected to the system.
‣
Retain all screws or other fasteners when removing access cover(s). Upon
completion of accessing inside the product, refasten access cover with original
screws or fasteners.
‣
Do not access the inside of the power supply. There are no serviceable parts in the
power supply. Return to manufacturer for servicing.
‣
Power down the server and disconnect all power cords before adding or replacing
any non hot-plug component.
‣
When replacing a hot-plug power supply, unplug the power cord to the power
supply being replaced before removing the power supply from the server.
Caution: If the server has been running, any installed processor(s) and heat sink(s) may
be hot.
Unless you are adding or removing a hot-plug component, allow the system to cool
before opening the covers. To avoid the possibility of coming into contact with hot
component(s) during a hot-plug installation, be careful when removing or installing the
hot-plug component(s).
Caution: To avoid injury do not contact moving fan blades. Your system is supplied with
a guard over the fan, do not operate the system without the fan guard in place.
4.7. Rack Mount Warnings
Note: The following installation guidelines are required by UL for maintaining safety compliance
when installing your system into a rack.
The equipment rack must be anchored to an unmovable support to prevent it from
tipping when a server or piece of equipment is extended from it. The equipment rack
must be installed according to the rack manufacturer's instructions.
www.nvidia.com
NVIDIA RTX Blade Server
Safety
DU-09554-001 _v02 | 23