Using Select( To Select Data Points From A Plot - Texas Instruments TI-83 Manual Book

Using Select( to Select Data Points from a Plot

To select data points from a scatter plot or xyLine plot, follow these
steps.
1. Press y 9 ~
is pasted to the home screen.
2. Enter
xlistname
designate list names into which you want the selected data to be
stored.
3. Press Í. The graph screen is displayed with
bottom-left corner.
4. Press } or † (if more than one stat plot is selected) to move the
cursor onto the stat plot from which you want to select data points.
TI-83 Plus Lists
to select
8
, press ¢, enter
from the
8:Select(
, and then press ¤ to
ylistname
menu.
LIST OPS
in the
Left Bound?
Select(
305