Drawing Line Segments; Drawing A Line Segment Directly On A Graph - Texas Instruments TI-83 Manual Book

Drawing Line Segments

Drawing a Line Segment Directly on a Graph

To draw a line segment when a graph is displayed, follow these steps.
1. Select
2:Line(
2. Place the cursor on the point where you want the line segment to
begin, and then press Í.
3. Move the cursor to the point where you want the line segment to end.
The line is displayed as you move the cursor. Press Í.
To continue drawing line segments, repeat steps 2 and 3. To cancel
, press '.
Line(
TI-83 Plus Draw Instructions
from the
DRAW
menu.
218