Siemens SIMODRIVE 611U Product Information page 11

4. Select the file with the desired firmware, e. g. the "611u.ufw" file and confirm your input
5. Wait until the firmware has been fully loaded.
6. Confirm the prompt with Yes. The drive executes a RESET.
Result
The firmware upgrade for the drive is completed. If required, you can now perform the
firmware upgrade for the PROFIBUS module.
Connecting the SIMODRIVE 611U to the Technology CPU
Product Information, 03/2008, A5E00272066-05
with Open.
Note
Do not cancel the downloading operation or interrupt the online connection to the
SIMODRIVE 611U under any circumstances.
Software Requirements
3.1 Converter
11