Table of Contents
Advertisement
Available languages
Available languages
Connectors and control units
C ONE side view with optionally available HELIX Digital Input Module HDM 1
Optical Input (optional)
1
Optical input for digital stereo signals ( SPDIF
format).
SPDIF Direct In switch (optional)
2
Switch for routing the digital input signal
directly to the amplifiers internal power stage.
Line Input
3
RCA inputs for connecting lowlevel line
signals.
7
TwinPower Link switch
7
Switch for operating two C ONE amplifiers in
bridge mode.
Mono RCA/Cinch In- / Output
8
Mono RCA/Cinch signal in- or output for
bridge mode operation in TwinPower Link
mode.
Remote Control
9
Input for connecting the optionally available
cable remote control for volume adjustment.
LPF
10
Control for adjusting the lowpass filter of the
from 15 Hz to 4,000 Hz.
1
3
optional
2
8
9
10
11
4
5
GND
4
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
+12 V
5
Connector for the +12 V power cable of the
positive terminal of the battery.
REM
6
Connector for the remote cable.
12
13
14
15
HPF
11
Control for adjusting the highpass filter from
15 Hz to 4,000 Hz.
Output Channel
12
Speaker outputs for connecting loudspeak-
ers.
Phase
13
Control for adjusting the phase from 0° to
180°.
Bass Boost Frequency
14
Control for adjusting the center frequency of
the Bass Boost from 40 to 120 Hz.
Bass Boost Gain
15
Control for adjusting the bass boost from 0 to
9 dB.
6
17
Advertisement
Table of Contents
