Safe Start; Wearing The Bodypack Transmitter - Shure ADX1M User Manual

Bodypack transmitter
Hide thumbs Also See for ADX1M:
Table of Contents

Advertisement

1.
From the Radio menu, navigate to Output.
2.
Choose one of the following options:
On: RF signal is active
Mute: RF signal is disabled
3.
Press O to save.
Turning the transmitter off and on, or replacing the battery will restore Output to On.

Safe Start

Power on in Safe Start mode to prevent interference with other devices. Hold the ^ button while powering on your device until
the Safe Start menu appears.
Safe Start menu options:
RF: Mute or On
Locks: None, Pwr, Menu, All
Use the navigation buttons to make changes.
Tip: To exit the Safe Start menu, cycle the power or momentarily remove the battery.
Note: Previous settings for locks and RF will be retained when the transmitter is powered on in Safe Start.

Wearing the Bodypack Transmitter

Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown.
For best results, the belt should be pressed against the base of the clip.
Tip: The clip can removed and rotated 180 degrees to increase mounting options.
Shure Incorporated
13/22

Advertisement

Table of Contents
loading

Table of Contents