Targus USB 3.0 SUPERSPEED ACA038EU Quick Start Manual page 3

GB-Contents
• Targus USB 3.0 SuperSpeed Video Adapter
• Driver CD
• DVI to VGA Adapter
2
System Requirements
Hardware
• PC with an Intel ® Pentium ® processor or equivalent
• USB port
Operating System (any of the following)
• Mircosoft Windows Vista with Service Pack 1 (32/64-bit)
®
• Mircosoft Windows XP with Service
®
Pack 2 or 3
• Mircosoft Windows ® 7 (32/64-bit)
Windows 7 Setup
®
1) Connect the Video Adapter to your laptop.
2) Windows will start installing the DisplayLink
Driver automatically.
NOTE: If the driver installation does not automatically start, discon-
nect the docking station from your laptop, insert the Driver CD, and
click on the Setup.exe file.
3) Follow the on-screen instructions until the installa-
tion is complete.
4) Connect the Video Adapter and monitor.
NOTE: Use the included DVI-I to VGA Adapter if needed.
Fit to TV Configuration
1. To configure Fit to TV, choose the option
from the DisplayLink Manager. The
following interface appears.
2. You will also see a red border on the
DisplayLink screen.
The red border shows the size of the new
WindowsDesktop. Use the "+" and "-"
controls to change the size of the red border
until it fits on the TV screen.
3. Once the red border is at the edges of
the TV screen, click "Apply" to resize the
Windows desktop.
3