Access Control - D-Link Air DWL-1000AP User Manual

Select the required security options in the WLAN Security property sheet.
Use this button to lock the settings
of the Access Points (almost)
permanently

Access Control

Within the IEEE 802.11 framework, Access Control is based on the hardware address of
the client stations. For each client you can select whether or not it will be allowed access
to the wireless network infrastructure. On the WLAN Security tab, check the Use Access
Control box to enable Access Control. If this box is not checked, any client station can
associate with your network.
Click the "Access Control Settings" button on the WLAN Security tab to pop up the
Access Control Dialog. Press "Add" to enter the client stations have been granted access.
As a default rule, access control for clients can be toggled on or off. The default
determines whether unregistered stations can join the network. You can move clients
between Access Granted and Access Denied lists by clicking the >> and << buttons or
pressing the left and right arrow keys.
Press Apply to confirm your changes and close the dialog.
Edit the Community String field to modify the
SNMP Write Community String for all Access
Points in the selected WLAN.
Select the data privacy algorithm(s) you want to
support in the Access Points.
See the section Access Control for details.
11