Specifications - Pioneer DEH-P9400MP Service Manual

5

1. SPECIFICATIONS

General
Power source 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system .......................... Negative type
Max. current consumption .......................... 10.0 A
Backup current .............................. Less than 6 mA
Dimensions
(mounting size) ...... 178 (W) × 50 (H) × 157 (D)
mm
(front face) ........ 188 (W) × 58 (H) × 24 (D) mm
Weight ............................................................ 1.7 kg
Audio/DSP
Maximum power output .......................... 50 W × 4
Continuous power output ........................ 27 W × 4
(DIN45324, +B = 14.4 V)
Load impedance ................ 4 Ω (4 – 8 Ω allowable)
Preout maximum output
level/output impedance ................ 4.0 V/100 Ω
Loudness contour .... +10 dB (100 Hz), +6.5 dB (10
kHz)
Equalizer (13-Band Graphic Equalizer)
Frequency ........ 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range .................... ±12 dB (2 dB)
Auto Equalizer (Just for standard mode)
(Front & Rear & Subwoofer 13-Band Graphic)
Frequency ........ 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range .......... +6 — –12 dB (2 dB)
Network (Standard mode)
HPF (Front/Rear)
Frequency ................ 50/63/80/100/125 Hz
Slope ...................................... –12 dB/oct.
Subwoofer
Frequency ................ 50/63/80/100/125 Hz
Slope ........................................ –18 dB/oct.
Gain ...................... –24 dB — +6 dB (1 dB)
Phase .............................. Normal/Reverse
Network (3-way network mode)
HIGH HPF
Frequency
........1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Slope .................................. –6/–12 dB/oct.
Gain .............. –24 dB — 0 dB/Mute (1 dB)
Phase .............................. Normal/Reverse
5
6
MID HPF/LPF
Frequency (LPF)
........1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Frequency (HPF)
..........31.5/40/50/63/80/100/125/160/200 Hz
Slope (LPF) .......... 0 (Pass)/–6/–12 dB/oct.
Slope (HPF) .. 0 (Pass)/–6/–12/–18 dB/oct.
Gain .............. –24 dB — 0 dB/Mute (1 dB)
Phase .............................. Normal/Reverse
LOW LPF
Frequency
..........31.5/40/50/63/80/100/125/160/200 Hz
Slope ............................ –6/–12/–18 dB/oct.
Gain ............ –24 dB — +6 dB/Mute (1 dB)
Phase .............................. Normal/Reverse
CD player
System ...................... Compact disc audio system
Usable discs ...................................... Compact disc
Signal format ........ Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics .... 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ........ 94 dB (1 kHz) (IEC-A n
work)
(volume: –30 dB)
Dynamic range .................................. 92 dB (1 kHz)
Number of channels ................................ 2 (stereo)
MP3 decoding format ........ MPEG-1 and 2 AUD
LAYER-3
WMA decoding format ...................... Ver. 7 and 8
FM tuner
Frequency range ............................ 87.5 – 108 MHz
Usable sensitivity ............................................ 9 dBf
50 dB quieting sensitivity ............................ 15 dBf
Signal-to-noise ratio .......... 70 dB (IEC-A network)
Distortion .............. 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response .......... 30 – 15,000 Hz (±3 dB)
Stereo separation ............ 40 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range .............. 531 – 1,602 kHz (9 kHz)
Usable sensitivity .................... 18 mV (S/N: 20 dB)
Selectivity ........................................ 50 dB (±9 kHz)
LW tuner
Frequency range .............................. 153 – 281 kHz
Usable sensitivity .................... 30 mV (S/N: 20 dB)
Selectivity ........................................ 50 dB (±9 kHz)
Note:
• Specifications and design are subject to modifica-
tion without notice for the sake of improvements.
DEH-P9400MP/EW
6
7
(0.8 mV/75 Ω, mono, S/N: 30 dB)
(1.5 mV/75 Ω, mono)
7
8
A
B
C
D
5
8