Table of Contents

Advertisement

Remove and discard (or recycle) all packing materials. To avoid loss of small parts, we suggest you keep
the small parts in the parts bag until you are ready to use them.
Packing List;
Ground Clamp Kit; Drain Hose; Hose Clamps; Grommet (used for Models WHES33,WHES44 & WHES48)
.
Programming the Central Water Filtration System
Words in picture: Display;UP button; Central Water Filtration System; DOWN button; CLEAN button;
PROGRAM button
When the power supply is plugged into the electrical outlet, a model code and a test number (example:
J2.0), begin to flash in the faceplate display. Then, 12:00 PM and the words "PRESENT TIME" begin to
flash.
NOTE: If "- – – -" shows in the display, press the UP or DOWN button until the model code "CF 8" shows
in the display. Then, press the PROGRAM button to set, and change to the flashing "PRESENT TIME"
display. Whole house water filtration is available in the areas of Tempe, AZ, Chandler, AZ San Tan
Valley, AZ Ahwatukee, AZ Phoenix, AZ Fountain Hills, AZ Cave Creek, AZ Scottsdale, AZ.

SET TIME OF DAY

If the words "PRESENT TIME" do not show in the display, press the PROGRAM button until they do.
Press the UP or DOWN buttons to set the present time. Up moves the display ahead; down sets the time
back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons down for fast
advance.
Press the PROGRAM button a few times, until the
time appears on the display, but is not flashing.
Questions? Call (480) 969-7251 Monday- Friday, 8 AM -5 PM Mountain time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents