Memory - MSI MS-98D3 User Manual

Hardware Setup Hardware Setup

Memory

These DIMM slots are ntended for memory modules.
1. Unlock the DIMM slot by flp-
png open ts sde clps.
2. Vertcally nsert the DIMM nto
the DIMM slot. The DIMM
has an off-center notch at the
bottom that wll only allow t to
ft one way nto the DIMM slot.
Push the DIMM deeply nto the
DIMM slot. The sde clps of
the slot wll automatcally close
when the DIMM s properly
seated and an audble clck
should be heard.
3. Manually check f the DIMM
has been locked n place by the
DIMM slot's sde clps.
Important
•
Motherboard photos shown in
this section are for demonstra-
tion only and may differ from the
actual look of your motherboard.
•
You can barely see the golden
finger if the DIMM is properly in-
serted in the DIMM slot.
2-6