THOMSON 28VT68ND User Manual page 28

television set
connections
COPYING VIDEO TAPES
It is necessary to have 2 VCRs with the same specifications : 2 VHS/8 mm or 2 S-VHS/Hi-8 mm.
Connect the playback VCR to the Euro-AV1 socket in playback mode.
Connect the recording VCR to the Euro-AV2 socket in recording mode.
During the copying of the tape, you can watch the station you are copying.
EQUIPMENT
VHS
Video recorder
or
S-VHS
Camcorder
SPEAKERS CONNECTIONS (OTHER OPTIONS)
CENTRAL SPEAKER
• Direct connection
If preferred, one or two speakers can be connected to replace the loudspeakers on your television set, as shown below :
In this case, the speakers must be placed beneath the television set.
CONNECTION TO A HI-FI SYSTEM
To boost the audio power, you may connect a Hi-Fi system, if you have one.
You must however avoid connecting your Hi-Fi and speakers to similar outputs (e.g. Hi-Fi on the CINCH surround
socket and speakers on the surround clips).
In this case, the configuration of the television set will match that described on page 15.
For a full appreciation of Dolby Surround Pro Logic sound, your television set should be placed in a spacious
room.
PLAY
SOCKET
Euro-AV 1
Audio/Video/S-Video
(at the back)
Unit 1
CALL UP
PROGRAMME EQUIPMENT
Video recorder
or
AV 1
Camcorder
Video recorder
AV 3
or
Camcorder
Dummy plug to cut the
sound from the second
internal loudspeaker
(if you plug one speaker only)
Unit 2
28
RECORD
SOCKET
Euro-AV 2
Audio/S-Video AV 2
Euro-AV 2
Audio/S-Video AV 2