THOMSON 28VT68ND User Manual page 16

television set
sound adjustments
LOUDSPEAKERS
Press the red button
The following menu is displayed: LOUDSPEAKERS is selected.
If this is not the case, select the Contents line with
the red key and LOUDSPEAKERS with
Select the SOUND line.
This varies depending on the sound type received:
SOUND MONO/STEREO or NICAM Stereo*
SOUND DUAL (2 languages)
SOUND NICAM 3*
SOUND AV
Select the required sound for the loud speakers.
For normal operation, AUTO/STEREO position is
recommended. STEREO or MONO will be selected
automatically depending on the signal received.
*NICAM is a digital sound transmission system, it enables you to receive broad-
casts in high quality STEREO or DUAL SOUND. Analogue MONO sound is trans-
mitted simultaneously, (MONO in NICAM STEREO or SOUND 3 in NICAM 3).
Effect
Select the LOUDSPEAKERS line
The number and type of selections available varies
according to the configuration selected (see p. 15).
Depending on the selected configuration,you will be able to
choose betwen 2 or 3 of the following options :
Normal, Wide, Hall, Dolby.
Select the type of sound required.
According to which selection and configuration is chosen (see
page 15), you will obtain one of the sound effects shown on the
table below.
When the type of sound received changes (mono to stereo or
vice versa), the sound effect automatically becomes that selected
for the type of sound received.
Press briefly to remove the menu.
LOUDSPEAKERS
Sound
Effect
TV Treble
.
TV Bass
Sound
Sound
Source Stereo
LOUDSPEAKERS
Sound
Effect
Treble
Bass
TV treble
TV bass
16
HEADPHONES AV
Auto/Stereo
Normal
Auto/Stereo
Sound Auto/Stereo
Sound Sound 1 Sound 2
Sound 1 Sound 2 Sound 3
Sound 1 Sound 2
HEADPHONES AV
Auto/Stereo Mono
Normal Hall
Mono
Wide
Mono
Mono
Dolby