Connections - THOMSON 28VT68N User Manual

television set

connections

VIDEO RECORDER CONNECTIONS
VIA THE AERIAL SOCKET
To tune your TV into your VCR you should refer to Manual
Programming (page 28).
The channel number (usually 36 or 60) is given in the manual of
your VCR. The programme selected for your VCR must be 9, 19
or 29.
Whenever you wish to use your VCR, you must select the
programme assigned to it.
VIA THE EURO-AV SOCKET 1 (AV1)
This is used to connect :
• Satellite receiver or decoder
• a VHS or 8mm video recoder or camcorder (VIDEO)
or a S-VHS or Hi-8mm video recorder or camcorder (S-VIDEO)
• a PC or video games console (RGB).
VIA THE EURO-AV SOCKET 2 (AV2)
This is used to connect :
• a VHS or 8mm (VIDEO), S-VHS or Hi-8mm (S-VIDEO) video
recorder.
If you have two VCRs connected, the decoder must be connected to the VCR connected to the
Euro-AV1 socket.
If you have a satellite receiver, refer to the operating manual in order to find out the type of
signal delivered then select VIDEO, S-VIDEO or RGB.
You can also connect it to the decoder socket of the second VCR if the latter is fitted with one.
VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV2)
This is used to connect :
• an S-VHS or Hi-8mm videorecorder (S-VIDEO)
(S and AUDIO sockets).
In order to maintain the optimum sound and picture
quality of your set, it is recommended not to connect
2 units to the Euro- AV1 socket and the
AUDIO/VIDEO/S sockets simultaneously.
VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV3)
This is used to connect :
• a camcorder VHS or 8 mm (VIDEO)(VIDEO and AUDIO sockets)
S-VHS or Hi 8 mm (S-VIDEO)(S and AUDIO sockets).
AV 1
AV 2
75 Ω
S-Video
S-VHS
VIDEO
VHS
22
Video recorder
and/or
Decoder
and/or
Satellite receiver
or
Camcorder
or
PC or video
games console
Video recorder
and/or
Satellite
receiver
(IN)
Video Audio
(OUT)
AUDIO
S
L R