THOMSON 28VT68N User Manual page 15

television set
sound adjustments
Balance
Select the Balance line (red key).
Balance the sound between the left and right channels.
Repeat the same procedure to select and successively adjust the
Bass and Treble.
HEADPHONES
Press briefly
The following menu is displayed :
HEADPHONES is selected.
If this is not the case, select the Contents line with the red
button and HEADPHONES with
Select the Headphones line (red key).
You can then adjust the volume for the headphone.
This operation also sets the output level of the HIFI
jacks (CINCH).
Note : When the transmission is multilingual (DUAL) or an
AV programme, the following menu appears. It is possible
to select SOUND 1 or SOUND 2 in the headset.
Select the Source line:
then select
or
AV
The sound output on sockets AV1 and AV2 must be adjusted
according to the type of headset connected.
Press briefly.
The following menu is displayed :
AV is selected.
If this is not the case, select the Contents line with
the red key and AV with
Select the AV Device line (red key).
Then selected
Stereo
Mono
Selecting stereo permits simultaneous recording of both
languages of a bilingual programme on a stereo video recorder :
Sound 1 on the left track and Sound 2 on the right track.
The sound available at the AV1 and AV2 outputs must be
adjusted according to the type of device connected.
Press to remove the menu from the screen.
.
Sound 1
Sound 2
.
= stereo VCR
= mono VCR
LOUDSPEAKERS
Headphones
Headphones
Source
Headphones
LOUDSPEAKERS HEADPHONES
AV Device
LOUDSPEAKERS HEADPHONES
AV Device
15
HEADPHONES AV
GB
Sound 1 Sound 2
AV
Stereo Mono
AV
Stereo Mono