Table of Contents
Advertisement
4 Installing Your Digital Receiver - Quick Connect Guide
The Set Top Box and the
television use a number of
different connectors. The main
ones that you need to identify are:
The POWER connector is used to connect mains power (via the power pack) to the Set Top Box.
RF connectors are used for connecting antenna leads. T
connectors are used for video and audio connections.
S
tart:
1
Co
nnect the power pack to the Set Top Box. Use the
connector marked POWER
2
Connect the Set Top Box to a
roof antenna. Use the connector marked RF IN.
3
Use the included SCART to RCA connection lead
4
Connect the red audio lead to the red audio connector on the television. Connec
audio lead to the white audio connector on the television. Remember that you must connect
the video to the same AV Input as the audio.
If
TV has COMPONENT
VIDEO
If your te
levision has
Component inputs (al
called YP B P R , DVD, YUV
YC B C R ) use them as they wil
red video lead to the red video in connector on the television. Con
to the blue and the green to the green.
Do not connect the yellow lead.
Y OUT (Green)
P (Blue)
B
and P (Red)
R
Not used
Turn the TV and the Set Top Box ON. Using the TV remote control, select the AV Input that the
Set Top Box has been connected too.
POWER
.
good quality outside /
so
or
l give the best picture. Connect the
AUDIO OUT R (Red)
AUDIO OUT L (White)
CVBS OUT (Yellow)
RF
SCART
he SCART connector and RCA
To TV
to connect to your television.
AUDIO OUT L (White)
CVBS OUT (Yellow)
Not used
nect the blue
If TV has Composite ( CVBS)
VIDEO
Television
If your te
AV Input
Component inputs then connect
R (Red)
AUDIO IN
the yellow lead to the yellow
L (White)
connector on the television bu
VIDEO IN
do not connect the green, blue o
(Yellow)
red video leads.
7
RCA
t the white
Television
AV Input
AUDIO OUT R (Red)
R (Red)
AUDIO IN
L (White)
P OUT
(Green)
Y
Y IN (Green)
P OUT
(Blue)
B
P IN (Blue)
P OUT
(Red)
R
P IN (Red)
levision does not have
B
R
t
r
Hide quick links:
Advertisement
Table of Contents
