Asus TUF Gaming X570-Plus Manual page 28

7. CPU, CPU optional, and chassis fan connectors; AIO pump connectors (4-pin
CPU_FAN, 4-pin CPU_OPT, CHA_FAN1-3; 4-pin AIO_PUMP)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
TUF GAMING X570-PLUS Fan connectors
•
•
Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP header,
and connect the fan cable to the CPU fan connector.
Header
CPU_FAN
CPU_OPT
CHA_FAN1
CHA_FAN2
CHA_FAN3
AIO_PUMP
1-14
A
A
B
D
C
AIO PUMP PWM
AIO PUMP IN
D
AIO PUMP PWR
E
F
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
Max. Current Max. Power
1A
1A
1A
1A
1A
1A
CPU_FAN CPU_OPT
B
AIO_PUMP CHA_FAN3
E
GND
Default Speed
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Full Speed
Chapter 1: Product Introduction
CHA_FAN1
C
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
CHA_FAN2
F