Removing The Status-Light Board; Prerequisites; Procedure - Dell Inspiron 14 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Open the latch and disconnect the status-light board cable from the status-light board.
2. Remove the screw (M2x3) that secures the status-light board to the palm rest and keyboard assembly.
3. Lift the status-light board off the palm rest and keyboard assembly.

Removing the status-light board

computer. After working inside your computer, follow the instructions in
Removing the status-light board
27
After
41