Genie DN83SPX/12 Instruction Manual

Pixim digital day/night bodied camera

Advertisement

Quick Links

The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
PIXIM Digital Day/Night Bodied Camera

Advertisement

Table of Contents
loading

Summary of Contents for Genie DN83SPX/12

  • Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Page 2: Table Of Contents

    ■ Contents Features How to Use the Camera ■ Menu Warnings and Precautions ■ Settings ㆍ PRESETS Components ㆍ EXPOSURE Names and Functions of Parts ㆍ WDR ㆍ WHITE BALANCE ■ Front ㆍ DAY&NIGHT ■ Bottom ㆍ IMAGE ADJ. ■ Back ㆍ...
  • Page 3: Features

    ■ Features Warning ■ The camera requires periodic inspection. High Resolution Colour for Crisp, Motion Detection Contact an authorised technician to carry out the inspection. Clear Video Since the camera detects motion without any ㆍProgressive image capture additional external sensor, you can monitor ㆍ690TVL Effective activity more efficient.
  • Page 4 ■ Precautions Do not drop the camera and Never keep the camera pointed Do not install the camera in Do not install or use the camera in an protect it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high.
  • Page 5: Components

    ■ Components Names and Functions of Parts ■ Front ② ③ 1. COLOUR BOX CAMERA ① 2. AUTO IRIS LENS CONNECTION PLUG 3. L-WRENCH 4. C-MOUNT ADAPTOR Lens protection cap ① Cover the lens when not using it. CS-Mount lens adaptor ②...
  • Page 6: Names And Functions Of Parts

    ■ Names and Functions of Parts Names and Functions of Parts ■ Bottom Back ⑤ ⑥ ⑦ ⑧ ④ IRIS JACK OSD EXTRA VIDEO OUT POWER ⑨ ⑩ ⑪ AC24V IN VIDEO DC12V IN ⑤ Auto iris lens connector This is the connection terminal for the auto iris lens. ⑥...
  • Page 7: Installation

    ■ Installation Installation ■ 3. Remove the cover of the auto iris lens connection plug and solder the ■ Lens lens cable to the connector pin in the plug. Lenses are sold separately. Lenses such as auto iris lens, LENS CS-Mount lens and C-Mount lens can be used.
  • Page 8: Connecting To A Monitor

    ■ Installation ■ Connecting to a monitor When using a CS-Mount lens Take off the lens protection cap and attach Connect the video output terminal located on the back of the camera to the CS-Mount lens to the camera by screwing the monitor.
  • Page 9: How To Use The Camera

    ■ How to Use the Camera ■ Menu ■ Settings Settings can be made using the 5 buttons on the rear of the camera. SETUP menu ㆍNORMAL ㆍINDOOR ㆍOUTDOOR OSD EXTRA IRIS JACK PRESETS VIDEO OUT ㆍBACKLIGHT POWER ㆍLENS SELECT ㆍBLC ㆍEXPOSURE MODE ㆍAGC...
  • Page 10: ㆍ Presets ㆍ Exposure ㆍ Wdr

    ■ How to Use the Camera SETUP EXPOSURE Select the function using Change the status using PRESETS NORMAL the UP or DOWN button. the LEFT or RIGHT button. EXPOSURE.. MIDDLE SETUP WHITE BALANCE PRESETS NORMAL DAY&NIGHT AUTO.. EXPOSURE.. IMAGE ADJ.. SPECIAL..
  • Page 11 ■ How to Use the Camera ● BLC : To optimize the scene when there is a strong backlight behind the object. - ON / OFF selectable SETUP PRESETS NORMAL ADVANCED BLC SETUP EXPOSURE.. PERCENTILE MIDDLE WHITE BALANCE PREV. SAVE. CANCEL.
  • Page 12: ㆍ White Balance ㆍ Day&Night ㆍ Image Adj

    ■ How to Use the Camera WHITE BALANCE Use the White Balance function to adjust the screen colours. Note 1. Position the cursor to point to WHITE BAL on the SETUP menu screen, select using the Up and Down buttons. •...
  • Page 13 ■ How to Use the Camera IMAGE DAY&NIGHT SETUP FREEZE NIGHT MODE BW+burst FLIP COLOR SHARPNESS TIME DELAY COLOR GAIN GAMMA PREVIOUS PAGE.. FOCUS.. PREVIOUS PAGE.. ● COLOR : The picture is displayed in colour. ● B/W : The picture is always displayed in black and white. ●...
  • Page 14: Camera Id

    ■ How to Use the Camera ● FOCUS : To adjust the lens focus. SPECIAL CAMERA ID FOCUS DETECTOR VIDEO OUT.. FOCUS METER DZOOM SET FOCUS REGION.. MOTION PREVIOUS PAGE.. PRIVACY MASK.. SYNC RESET SET FOCUS REGION PREVIOUS PAGE.. ● CAMERA ID : User can enter a unique name for the respective camera. The maximum length of the ID is ten characters.
  • Page 15 ■ How to Use the Camera ① Select the position where the ID is to be displayed by using the MOTION DETECTION LEFT and RIGHT buttons. ACTIVITY THR. ● VIDEO OUT : Move the cursor to select the video system MESSAGE TIME - VIDEO STANDARD : You can control NTSC / PAL, Video level, SETUP MOTION ZONE..
  • Page 16 ■ How to Use the Camera ● RESET : Resets the camera. ENABLE MASKS (1 to 6) ENABLE MASKS (7 to 12) MASK 1 MASK 7 MASK 2 MASK 8 MASK 3 MASK 9 MASK 4 MASK 10 EXIT MENU. MASK 5 MASK 11 MASK 6...
  • Page 17: Troubleshooting

    ■ Troubleshooting If there are problems with the camera operation, check the tables below. Problems Troubleshooting If the problem persists, please contact the agent who supplied the product. ㆍCheck if 'MOTION DETECTION' mode is The MOTION Problems Troubleshooting turned on. DETECTION function is not working.
  • Page 18: Specifications

    Composite video output 75 ohm terminated Video Output Built-in DC / VIDEO Iris Control 30% ~ 90% RH Operating Humidity -10˚C to 50˚ Operating Temp. Appro. 260g Weight ※ POWER OPTION - DC12V Only : DN83SPX/12 PIXIM Digital Day/Night Bodied Camera...
  • Page 19 ■ MEMO...
  • Page 20 Model : DN83SPX DN83SPX/12 PIXIM Digital Day/Night Bodied Camera Instruction Guide GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543 www.geniecctv.com Edition. GN-OCTOBER 2011...

This manual is also suitable for:

Dn83spx

Table of Contents