Audio Dubbing - THOMSON VMD 22 User Manual

76
USING THE REMOTE CONTROL UNIT
EN
Display
6e
Speaker
Stereo microphone
Remote sensor
External
microphone
input connector
VMD22 EN(66/100)

Audio Dubbing

Audio Dub
The audio track can be customized only when recorded in
Standby mode
the 12-bit mode (
NOTES:
Audio Dubbing is not possible on a tape recorded in 16-
bit audio, on a tape recorded in the LP mode or on a
blank portion of a tape.
To perform Audio Dubbing while watching on the
television, make connections (
1
POWER Switch
2
Lock Button
3
4
To hear the dubbed sound during playback . . .
.... set "12BIT MODE" to "SOUND 2" or "MIX" in the
NOTES:
Audio dubbing is also possible using an optional
microphone connected to the MIC connector on the
Docking Station.
Sound is not heard from the speaker during Audio
Dubbing. To hear sound, connect optional headphones
to the AV OUT connector.
While an optional microphone is connected, the built-in
microphone is disabled.
When editing onto a tape that was recorded at 12-bit,
the old and new soundtracks are recorded separately.
If you dub onto a blank space on the tape, the sound
may be disrupted. Make sure you only edit recorded
areas.
Located
If feedback or howling occurs during TV playback, move
beneath
the camcorder's microphone away from the TV, or turn
the cover.
down the TV's volume.
AV OUT
If you change from 12-bit to 16-bit in mid-recording and
(headphone)
then use the tape for Audio Dubbing, it is not effective
connector
from the point where 16-bit recording began.
During Audio Dubbing, when the tape moves to scenes
recorded in the LP mode, scenes recorded in 16-bit
DISPLAY
audio or a blank portion, Audio Dubbing stops
A.DUB
(
PLAY
To perform Audio Dubbing with a video unit connected
PAUSE
to the camcorder's AV connector, first set "AV/S-VIDEO"
to "IN" in the Menu Screen
STOP
(
using optional headphones.
76
pg. 27).
Play back the tape to locate the point where editing
will start, then press PAUSE (6).
While holding A.DUB (e) on the remote control,
press PAUSE (6). "6e" appears.
Press PLAY (4) , then begin "narrating".
Speak into the microphone.
•To pause dubbing, press PAUSE (6).
To end Audio Dubbing, press PAUSE (6), then STOP
(5).
Menu Screen ( pg. 41, 42).
pg. 91).
pg. 41). You can hear sound from the video unit
29/08/00, 15:47
(cont.)
pg. 56).