Technical Data; Before Starting The Equipment - EINHELL BT-CD 18/1 i Original Operating Instructions

4. Technical data

Motor supply voltage: .............................. 18 V DC
Idling speed: ............................ 0-300/0-900 min
Torque settings: ....................................... 19+1+1
Clockwise/Counter-clockwise: ........................Yes
Clamping range of drill chuck: .......... max. 13 mm
Battery charge voltage: .................... 3,6-18 V DC
Battery charge current: ........................max. 1,5 A
Battery charger supply voltage: ............................
............................................230-240 V ~ 50-60Hz
Charging time: ...............................approx. 1 hour
Battery type: ................................................ NiCd
Weight: .....................................................1,75 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 83,1 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 94,1 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
K uncertainty = 1.5 m/s
Hammer drilling in concrete
Vibration emission value a
K uncertainty = 1.5 m/s
Screwing without hammer action
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
Anl_BT_CD_18_1_i.indb 6 Anl_BT_CD_18_1_i.indb 6
GB
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
-1
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
≤ 2.5 m/s
2

5. Before starting the equipment

h
2
Be sure to read the following information before
you put the cordless screwdriver into operation:
= 10,772 m/s
2
h
1. Charge the battery only with the charging unit
2
supplied.
2. Only ever use sharp drill bits and screwdriver
bits which are suitable for the purpose and in
≤ 2.5 m/s
2
h
faultless condition.
2
3. Always check for concealed electric cables
and gas and water pipes when drilling and
screwing in walls.
- 6 -
09.08.12 18:14 09.08.12 18:14