Fiat 500L Owner's Handbook Manual page 202

Hide thumbs Also See for 500L:
Table of Contents

Advertisement

"TOUCH SCREEN"
FUNCTION
The system uses the "touch screen"
function; to interact with the different
functions, press the "graphic buttons"
displayed.
Confirmation of a selection: press
the "OK" button.
Going back to the previous screen:
press the
(Delete) button or,
depending on the activated screen,
/Done.
USB/iPod/AUX SUPPORT
The vehicle has a USB/AUX port
located in the centre tunnel.
RADIO MODE
After the desired radio station is
selected on the display (see fig. 164),
the following information is shown:
164
200
At the top: the list of radio stations
stored (preset) is displayed; the station
being listened to is highlighted.
In the middle: display of the name of
the current radio station and the
buttons (
/
previous or next radio station.
At the bottom: display of the following
buttons:
❒ "Browse": list of the radio stations
available;
❒ "AM/FM", "AM/DAB", "FM/DAB":
selection of the desired frequency band
(button reconfigurable according to
the band selected: AM, FM or DAB);
❒ "Tune" : manual radio station tuning
(not available for DAB radios);
❒ "Info": additional information on the
source being listened to;
❒ "Audio": access to the "Audio
setting" screen.
Audio menu
The following adjustments can be
carried out using the "Audio" menu:
❒ "Equalizer" (for versions/markets,
where provided);
❒ "Balance/Fade" (left/right and
front/rear balance adjustment);
❒ "Volume/Speed" (excluding versions
F0Y1000C
with Hi-Fi system) speed-dependent
automatic volume adjustment;
❒ "Loudness" (for versions/markets,
where provided);
❒ "Auto-On Radio";
❒ "Radio Off Delay".
MEDIA MODE
) for selecting the
With Media mode active, briefly press
the
previous/next track or keep the
forward the track.
Track selection (Browse)
NOTE For languages not supported by
the system which feature special
characters (e.g. Greek), the keyboard is
not available. In these cases this
function will be limited.
Bluetooth® SOURCE
Pairing an audio device
To pair a Bluetooth® audio device,
proceed as follows:
❒ activate the Bluetooth® function on
the device;
❒ press the MEDIA button on the front
panel;
❒ if the "Media" source is active, press
the "Source" button;
❒ select the Bluetooth® Media
source;
❒ press the "Add Device" button;
/
buttons to play the
buttons pressed to fast rewind/
Bluetooth®
/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents