Information Display - Baxi Luna 3 Avant Series Instructions For The User And The Installer

To correct light the boiler, proceed as follows:
• Provide power supply to the boiler.
When the gas boiler is power supplì, the display shows the following information:
1. all symbols alight;
2. manufacture information;
3. manufacture information;
4. manufacture information;
5. Type of boiler and gas used (eg.
The displayed letters mean the following:
O
n
= natural boiler chamber
= natural gas METANE
6. Hydraulic system;
7. Software version (two numbers x.x);
• open the gas cock;
• press the button, for at least two seconds, to set the operating boiler mode (see section 3.2).
To display some useful information during the boiler operation proceed as follows:
• Press the ( ) button for at least 6 seconds until the display shows "A00" (..."A07") alternating with the respective
value (e.g. fi gure 13);
Figure 13
BAXI - 925.200.1
925.492.2

19. INFORMATION DISPLAY

19.1 FIRST DISPLAYED INFORMATION
Cn
)
19.2 OPERATION INFORMATION
C
= sealed boiler chamber
L
= LPG gas
INSTRUCTIONS PERTAINING TO THE INSTALLER
17
GB
HU
CZ