Starting & Stopping - McCulloch Mini-Mac 6 Owner's Manual

STARTING & STOPPING
1. Fill the fue l tank with the correct
fuel mixture. Fill the chain oil tank
with McCulloch Chain, Bar and
Sprocket Oil. Pump the manual
oiler lxItton until oil shows between
the chain and th e bar at the top of
the bar where the chain comes Qut
from behi n d the clu teh guard.
Figure 6.
2. Make sure the chain has the cor-
rect tension and that the bar is
tight
on
the saw.
3. Slide the ignition switch to th e ON position.
4 . Turn the choke l ever to the
fully
closed pOSition . A warm engine usually
does not r equir e the us e of the choke. However, when restarting an ex-
10