11. Attach the Seat (9) to the Frame (3) with two
M6 x 35mm Screws (26) and two M6 Washers
(29).
12. Raise the left Weight Rest (15) to the desired
height. Insert an Adjustment Knob (10) into the
Left Upright (1) and the Weight Rest, and tight-
en the Adjustment Knob into the Left Upright.
Repeat this step with the right Weight Rest
(15). Make sure that the Weight Rests are at
the same height.
13. Make sure that all parts are properly tightened before you use the weight bench. The use of all remain-
ing parts will be explained in ADJUSTMENT, beginning on page 11.
All manuals and user guides at all-guides.com
10
11
9
3
12
15
29
29
26
15
10
1