Samsung CS29Z45 Owner's Instructions Manual page 2

Remote Control
(depending on the model)
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
1 POWER 3 ▲/▼/◄/►
Used to switch the TV
on and off.
2 MENU
Used to display the
on-screen menu or
return to the previous
menu.
AA68-04048J-Eng.indd 2
All manuals and user guides at all-guides.com
4 MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
= + or = - button.
5 Numeric buttons
Used to select channels
directly.
6 INFO
Used to view the
channel information
and setting status you
selected.
7 SOURCE
Used to display all of
the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing Tools button.
1. Sleep Timer(Used to
2. Picture Mode(Used
3. Sound Mode(Used
4. Dual I-II(Used to
Used to control the
cursor in the menu.
Installing Batteries
P < / >
Remove the cover. Install two AAA size
Used to display the
batteries, then replace the cover.
next or previous stored
When the remote control does not
channel
operate normally, check that the "+" and
"-" ends of the batteries are inserted correctly or the batteries
= + / -
are drained.
Used to increase or
decrease the volume. Do not mix battery types, i.e. alkaline and manganese.
➢
5. Turbo Plus(Used to
select the Turbo Plus
option.)
6. Sound Adjust (Used
to display the sound
menu)
9 ENTER
While using the
on-screen menus,
press the ENTER
button to activate (or
change) a particular
item.
0EXIT
Used to exit from any
display or return to
normal viewing.
! PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
select a preset time
interval for automatic
turn off.)
to select the picture
effect.)
to select sound
effect.)
select sound mode.)
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
➢
television and the frequency is 50 or 60Hz.
2 Press the "P" button (On/Off) CH</> button on the
front (or side) of the television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to "Channel - Auto Store" on page 3 or "Channel -
Manual Store" on page 3.
I f the television is initially powered on, several basic
➢
customer settings proceed automatically. Refer to
"Setup - Plug & Play" on page 3.
4 Press the P</> button, or Numeric button on the
remote control.
➢ Caution: One pole switch is totally not off (one line still
live) if power cord is not unplugged.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
2 To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
2009-12-07 6:2