INSTALLATION
16
Insulation
Insulate the connected pipes completely(all thermal insulation must comply with local
requirement)
Refrigerant pipe
(Local supply)
Thermal insulator for refrigerant pipe
(Local supply)
CAUTION
!
Insulate completely unconnected pipes as shown in the Figure.
Make sure that there is no clearance here
Thermal insulator for refrigerant pipe(Local supply)
Not connected pipe
Always seal up the
tip of unused pipe by brazing
Make sure that there is no
clearance here
Thermal insulator for
refrigerant pipe(Local supply)
Overlap with thermal
insulator for piping