Playback; Playing A Pre-Recorded Dvd-Video Disc; Playing A (Super) Video Cd - Philips DVDR1000 Instructions For Use Manual

Playback

Playing a pre-recorded DVD-
Video disc
Some DVD discs are produced in a way that requires
specific operation or allows only limited operation
during playback. In these cases the Recorder may not
respond to all operating commands. When this occurs,
please refer to the instructions in the disc jacket or case.
When an appears in the top left corner of the TV
screen, the operation is not permitted by the Recorder
or the disc.
1 Insert a pre-recorded DVD-Video disc. Make sure
the label is facing up. If the disc is two-sided, make
sure the label of the side you want to play is facing
up.
When 'Auto resume' is 'On' (see 'User
Preferences') playback starts automatically from the
point at which it stopped the last time the disc
played.
When 'Auto resume' is 'Off' the disc will play
from the start of the disc. You can resume play from
the point at which it stopped the last time by
pressing 2 PLAY shortly while
top left corner of the TV screen. When pressing
2 PLAY at beginning of disc playback an "X" may
show on the screen.
The currently playing title and chapter number
will appear on the Recorder display. The elapsed
playing time appears also.
Notes:
- DVD movies are released at different times in different
regions of the world. All players have region codes, and discs
can have an optional region code. If you load a disc that has
a different region code than your Recorder, you will see the
region code notice on the screen. The disc will not play and
should be unloaded.
- The region code of this Recorder is one (1).
This is stated on a label on the back of your
1
Recorder.
- Regional coding is not applicable for DVD+RW
discs.
2 The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical button; if not, use the
w/v/u/t (down/up/right/left cursor) buttons to
highlight your selection, then press OK.
All manuals and user guides at all-guides.com
appears in the
3 To stop play at any time, press 9 STOP.
The default screen will appear, giving information
about the current status of the Recorder.
REC/OTR
STOP
REVERSE
PAUSE
PREVIOUS
EDIT
Note:
During playback you can display and enter the DVD disc
menu by pressing DISC MENU.

Playing a (Super) Video CD

1 Insert a (Super) Video CD.
When 'Auto resume' is 'On' (see 'User
Preferences'), playback starts automatically from the
point at which it stopped the last time the disc
played.
The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical button.
2 To stop play at any time, press 9 STOP.
The default screen will appear.
PLAY
FORWARD
SLOW
NEXT
PLAYBACK 43