Sceptre X42 User Manual page 75

All manuals and user guides at all-guides.com
5. SETUP CODE – This subfunction sets the password.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
↵ ↵ ↵ ↵
b. Press or ► to select the functions and highlight AUTO LOCK.
↵ ↵ ↵ ↵
c. Press to select the function.
d. Press ▼ until you see SETUP CODE and use
e. Input "0000" as your password and input your new password.
Please Note :
There is no way of resetting the password.
•
If you're going to change the password, please write it down
•
and keep it in a safe place just in case you forget.
SCEPTRE X42 HDTV User Manual
- 75 -
www.SCEPTRE.com
↵ ↵ ↵ ↵
to select it.