Sceptre X42 User Manual page 42

All manuals and user guides at all-guides.com
↵ ↵ ↵ ↵
3. Press the button to go into TUNER MODE function.
4. Press the ▲ or ▼ buttons to select the options AIR or CABLE.
5. If you have an antenna connected to the X42 LCD HDTV, please select
AIR as your option by pressing the
6. If you have cable connected to your X42 LCD HDTV, please select
CABLE as your option by pressing the
will pop up. Please use the ▲ or ▼ buttons to select AUTO as your
cable option and press
7. Once you have made the selection, the OSD will return you back to
CHANNEL main options. Press the ▼ button to highlight the AUTO
SCAN function and press
8. Once the scanning is done, you can watch the TV.
Please Note :
Not all broadcasts are in High Definition (HD). Please refer to
•
your local broadcasting stations for more information.
The X42 LCD HDTV's tuner is designed for HDTV therefore
•
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X42
LCD HDTV might lose picture or sound.
SCEPTRE X42 HDTV User Manual
↵ ↵ ↵ ↵
button.
↵ ↵ ↵ ↵
↵ ↵ ↵ ↵
to confirm the selection.
↵ ↵ ↵ ↵
twice to start scanning for channels.
- 42 -
www.SCEPTRE.com
button. An additional option