Count
Sets or acquires the number of beeps or vibrations of the beeper or vibrator.
■
Syntax
[VB]
Public Property
[C#]
public int
Count
■
Property
Number of beeps or vibrations of the beeper or vibrator
Parameter values: 0 to 255. The beeper will not sound if "0" is specified.
Default value: 1
Exceptions
■
None
Note
■
If a value outside the permissible range is specified, no exceptions will be thrown
immediately, however, an exception will be thrown later when the start of beeping or
vibrating is specified with an Item property.
[Ex.] Set the beep count to 5.
[VB] MyBeep.Count = 5
[C#] MyBeep.Count = 5;
Count
As Integer
{get; set;}
- 167 -