Required Accessories And Tools; Supplied Accessories; Optional Accessories; Other Required Accessories From Specialist Outlets - Siemens S36IT Series Installation Instructions Manual

Required accessories and tools

1. Supplied accessories

- Installation instructions
- Operating instructions
- Installation kit
2. Optional accessories8.
Extreme Combination Side by Side Heating kit
If the gap between the appliances is less than
6" (160 mm).
Extra long finger protection part
Panel unification part (Metal strip)
For connection of two furniture doors. Can be used
for standard height furniture doors without further
preliminary work.
3. Other required accessories
from specialist outlets
Ice maker installation kit ¼" OD copper line
For connecting appliances which require water, e.g. for
an ice maker.
i
Maximum outer diameter of the water pipe
(without fittings):

4. Tools

- Cordless screwdriver T20
- Torx screwdriver T20
- Torx bit T20 + magnetic holder
5
- / " (8 mm) hex nut driver
16
- Wood drills in different sizes
- Open end wrench ½" (SW 13 mm)
- Multigrip pliers
- Adjustable wrench
All manuals and user guides at all-guides.com
13
/ " (10 mm).
32
- Cutter with adjustable blade
- Metal tape measure
- Square
- Spirit level length 2' (60 cm) and 4' (1,2 m)
- Marking out level, length at least 4' (1.2 m) for
individual appliances or 7' (2.0 m) for Side by Side
installation

5. Other

- Stepladder
- Dolly, hand truck
- Hammer drill for drilling holes in wall or floor
- Bits according suitable for material and in different
sizes
- Wooden beam (cross section min. 3" x 4" (75 cm x
100 cm) as an alternative tilt protection, length
according to the width of the installation cavity
- Wooden screws in different sizes
1
- Thin (max. / " (1.5 mm)), suitable material to
16
protect the floor from damage (e.g. lino)
- Suitable material for covering and protecting
furniture (e.g. protective sheets)
- Adhesive tape
11