Siemens 985-047 Operating Instructions Manual

Actuator Commissioning Tool

Product Description

The 985-047 Actuator Commissioning Tool provides
a portable instrument for exercising, calibrating, and
testing resistive, proportional (voltage/current),
floating, and on/off actuators. LED display shows
feedback voltages or output. LEDs indicate
operating mode selection and auxiliary switch
contact closure. The Commissioning Tool combines
accurate and reliable technology in a user-friendly,
yet economical package.
The Commissioning Tool saves on installation time
and is compatible with all Siemens actuators and
most competitors' models. A plug-in transformer or
24 Vac power supply input enables the
Commissioning Tool to output resistance,
AC voltage, DC voltage, and current for controlling
an actuator. It requires no controller hook-up, which
makes equipment calibration, setup, and adjustment
a quick and easy process.
Figure 1. Actuator Commissioning Tool.
Item Number 129-287, Rev. 100

Features and Benefits

•
Universal Compatibility
Works with all Siemens actuators, most
competitors' actuators, and other voltage,
current, or resistance controlled equipment
•
Compact Portable Unit
Allows easy handling in the field
•
Pushbutton Selectable Output/Feedback
Modes
Gives user a complete testing device. No
separate instruments are required for field
testing
•
Digital and LED feedback Displays
Provides user with clearly readable voltage
and auxiliary switch feedback in dimly lit
conditions
•
Plug-in Terminal Block Test Lead
Connections
Accommodates easy interchangeability of
multiple sets of test leads
Contents
•
Actuator Commissioning Tool
•
Plug-in transformer
•
Terminal blocks, set of three (extra)
•
Carrying case
Required Tools
•
Test leads
•
1/8 in. tip flat-blade screwdriver
Product Number
985-047
Operating Instructions
Document No. 129-287
Rev. 1, October, 1999
Page 1 of 8