Basic Information; Basic Product Log In Information; Important Notice; Quick Installation - TP-Link TL-WR703N Quick Installation Manual

Wireless nano ap router pre-installed with dd-wrt firmware
Table of Contents

Advertisement

Quick Installation Guide for TL-WR703N

1. Basic Information

1.1

Basic Product Log In information

1.1.1 Log in Information
You can log into the interface of this Nano WIFI router with the
following information:
IP Address: 192.168.1.1
User Name: admin
Pass Word: admin
1.2

Important Notice

1.2.1 We are responsible for the quality warranty if this product
comes at DOA (Death On Arrival) Status.
1.2.2 This product is pre-installed with current version of DD-WRT
firmware, you are able to setup WIFI wireless broadband network
with this device based on the current firmware. If you have any
questions for using this router, please feel free to contact us.
1.2.3 DD-WRT is an open sourced, editable, continual upgradable
third party firmware. We are not responsible for the quality problem
caused by upgrading this router with other version of DD-WRT
firmware by the buyer/end-users himself/herself.

2. Quick Installation

Advertisement

Table of Contents
loading

Table of Contents