TP-Link TL-WR703N Quick Installation Manual page 12

Wireless nano ap router pre-installed with dd-wrt firmware
Table of Contents

Advertisement

your router is configured and able to connect to the Internet.
2.4.3.2 For "PPPoE"
This is usually for dialing up ADSL. If your Internet connection type
offered by your ISP is "PPPoE", please select "PPPoE".
In the interface above, please input "User Name" and "Password"
which is offered by your ISP (Internet Service Provider).
And then click "Save", and then click "Apply Settings" as below.
After this, the router is rebooting, please wait for 3 minutes, then
your router is configured and able to connect to the Internet.
2.4.3.3 For Static IP
If your Internet Connection type is "Static IP", Please select "Static
IP"
In the interface below, input the related parameters offered by your
ISP (Internet Service Provider).

Advertisement

Table of Contents
loading

Table of Contents