Approved Combinations Of Cutting Attachment, Deflector, Handle And Harness - Stihl FS 40 Instruction Manual

Approved Combinations of Cutting Attachment, Deflector, Handle and Harness

Cutting attachment
1
3
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
For safety reasons only the
cutting attachments, deflectors,
handles and harnesses shown in
each row of the table may be used
together. No other combinations
are permitted because of the risk
of accidents.
Only mowing heads (1, 2, 3, 4) may be
used on trimmers with a curved drive
tube and loop handle.
To reduce the risk of injury,
avoid contact with the rotating
cutting attachment.
FS 40, FS 40 C, FS 50, FS 50 C
Deflector
2
4
Cutting Attachments
Mowing heads
1 STIHL AutoCut C 5-2
2 STIHL AutoCut 5-2
3 STIHL PolyCut 6-3
4 STIHL FixCut 5-2
Deflector
5 Deflector with blade for mowing
heads only (see "Mounting the
Deflector").
Handle
6 Loop handle
Shoulder strap
7 Shoulder strap may be used
Handle
5
6
Harness/Strap
7
Equipment
Among other parts, the complete unit
includes:
– Cutting attachment
– Deflector
– Handle
– Shoulder strap (special accessory)
English
9