Sonos CONNECT:AMP Product Manual page 6

4
CONNECT:AMP back
Ethernet ports (2)
Right speaker terminals
Left speaker terminals
Voltage select
AC power (mains) input
Analog audio in
Subwoofer output
Note: If you disconnect your subwoofer,
make sure to also disconnect the
subwoofer's cable from the
CONNECT:AMP output.
You can use an Ethernet cable (supplied) to connect to a router,
computer, or additional network device such as a network-attached
storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Use high-quality speaker wire to connect the right speaker to the
CONNECT:AMP.
Use high-quality speaker wire to connect the left speaker to the
CONNECT:AMP.
100 – 120V~ / 220 – 240V~ 50 – 60 Hz
Select the appropriate voltage setting for your country.
Use only the supplied power cord to connect to a power outlet (using a
third party power cord will void your warranty).
You may use a standard RCA audio cable to connect the
CONNECT:AMP's analog audio inputs to the audio outputs from a
separate audio component, such as a CD player or a portable music
player.
You may connect a powered subwoofer to this output using a standard
RCA cable. The system will detect when a cable is connected to the
subwoofer output and adjust the crossover frequency automatically.
Product Guide