Using The Menu System - Tascam D00851300A Owner's Manual

Using the menu system

Entering the menu system
To enter the menu category of your
choice, do the following:
 Effect menu (bass guitar effects)
After selecting an effect slot, press
and hold the EFFECT/EDIT
 EQ menu (equalizer)
After selecting an EQ slot (A or B),
press and hold the
EQ/EDIT
 Tuner menu (bass guitar tuner)
Tap the TUNER/SETUP
 Setup menu (system setup)
Press and hold down the
SETUP key
 Tempo/Key menu (changing tem-
po and pitch of CD)
Tap the TMP/KEY / CD EFF
 CD Effect menu (CD playback ef-
fects)
Press and hold down the
KEY / CD EFF key
 Metronome menu
Press and hold down the
key.
The menu then shows the menu cate-
gory you select, reversed and blinking.
14
— TASCAM CD-BT1MKII
Menu
Category
EFFECT
key
EQ
key
key
TUNER
TUNER/
key
SETUP
TMP/
STOP
Menu Values (default values
Item are underlined)
EFF ON/OFF
LIB 1 – 4, c1 – c7, d1 – d5
Parameter –
LVL 0 to 64
EQ L/ EQLM/
EQ M/ -15 – 0 – +15
EQMH/ EQ H
MID ON/OFF
TUNE MODE=BAS: 5B, 4E, 3A, 2D, 1G
MODE CHR/BAS
OSC OFF, _C – _B, C – A, B,
(3 octaves)
CAL 435–440–445
MIX B10 – B1, 0, C1 – C10
PLAY ALL/SGL
CUE CUE/FLS
Notes
turns effect on or off
preset number
depends on effect type
effect output level
adjusts the gain of the
equalizer band (low, mid-
low, mid, mid-high, high)
turns mid shaping function
on or off
sets string number in Bass
Mode
selects tuner mode
_ _
C – B, sets pitch of the oscillator
sets base frequency (A4,
unit: Hz)
sets mix balance between
CD and input
selects all or single play
CUE
selects action of