Table of Contents
Advertisement
4 − Recording
Setting up your first song
This example shows how to record a rhythm guitar, followed
by recording an accompanying lead guitar. This is a simple
recording, but the same procedures also apply to more com-
plicated recordings, so please read this section carefully.
New song
To make sure we start with a "clean slate," we will create a
new song.
T I P
The 2488neo is shipped from the factory with a new
song ready for you to record. However, if the 2488neo
has been used before, it will automatically load the
last song that was worked on, and you may need to
follow these instructions to create a new song. Nor-
mally, though, this will not be needed.
1
Press the
MENU
key and the MENU screen appears.
Use the cursor keys or the
SONG, and press
YES/ENTER
2
In the SONG menu, use the cursor keys or the
DATA
dial to select CREATE, and press
24
TASCAM 2488neo
JOG/DATA
dial to select
.
JOG/
YES/ENTER
.
3
In the CREATE screen, press the
lowed by the
TITLE
key to enter titling mode.
4
Use the dial and the cursor keys to give the song a
name up to 12 characters in length (see "Titling"
on page 15). Press
YES/ENTER
After confirming the song title, the CREATE
screen reappears.
5
On the CREATE screen, press
key fol-
SHIFT
when you are done.
YES/ENTER
.
Advertisement
Table of Contents
