Configuration instructions are included on the back of this document. A maximum of three LCP-32/16 panels may be connected to one KP-32 Keypanel. CAUTION: Do not connect a KP-32 power supply to the LCP-32/16. Doing so could cause damage to the unit. 9350-7672-000 Rev A...
Page 2
17-32. The third LCP-32/16 is connected to the second LCP-32/16 and is assigned (by default) to keys 33- 48. The only time that the KP-32 will need to be configured for use with an LCP-32/16 is when the KP-32’s LCP-32/16 settings have been changed from their defaults, or when you need to change the settings from their defaults such as when an LCP-32/16 is only needed on keys 17-32.